Topic: Signal masker draining loads of AP bug.
I have T3 signal maskers fit to my bots and they are destroying my accumulator.
It says 2 ap every 10 seconds. It must be draining 30 times more than that.
You are not logged in. Please login or register.
I have T3 signal maskers fit to my bots and they are destroying my accumulator.
It says 2 ap every 10 seconds. It must be draining 30 times more than that.
It should be draining 2 ap every second I believe.
It's draining my AP every 2 seconds or so at about 20 ap per 2 seconds.
It should be draining 2 ap every second I believe.
It says on it 2 ap every 10 seconds.
Even if it was 2 every 2 seconds, that's 20 ap every 10 seconds, and it's draining way more than that. A 10 second cycle drains my ap over 100+. It's doing something like 24 ap per 2 seconds.
It's (2AP * Robot Surface Size) every 2 Secs plus activation cost as well.
2AP * 4m = 8AP every 2 seconds over 10 seconds.
This is how the feature was explained when it was introduced.
Heavy Mech
2AP * 10m = 20AP every 2 seconds over 10 seconds is a total of 100AP every 10 seconds.
They need to make a system for dynamically changing the activation cost of modules.
It's (2AP * Robot Surface Size) every 2 Secs plus activation cost as well.
2AP * 4m = 8AP every 2 seconds over 10 seconds.
This is how the feature was explained when it was introduced.
Heavy Mech
2AP * 10m = 20AP every 2 seconds over 10 seconds is a total of 100AP every 10 seconds.
They need to make a system for dynamically changing the activation cost of modules.
and thats even in their description
someone has to copy over the code from shield information to masking and detection modules.
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
Generated in 0.051 seconds (91% PHP - 9% DB) with 18 queries